turn signal question - Motorcycle-Journal Forums

flipmo · 03-19-2005, 06:26 AM

I bought a 94 gsxr750 a couple of weeks ago when I bought it it did not have any turn signals on the bike. Since then I have installed turn signals this is the problem. The turn signals are solid they don't flash from right to left they just light up solid. I bought a new turn signal relay from the dealer thinking that was the problem put it in yesterday and nothing they are still solid no flashing so I'm back to step one. If anyone could help it would be thankful.
Thanks flipmo

**Clint** · 03-19-2005, 11:02 AM

Need more info. Did you use the original wiring? What signals? What bulbs?

flipmo · 03-19-2005, 11:27 AM

Yes I did use the factory wiring and all the turn signals do the same thing front and back when you turn the signal on weather its the left or the right it is just solid no flashing. I replaced the bulbs in the instrument panel because one of them was blown I have voltage going to the lights they just don't flash what other info do you need.
Thanks flipmo

2004gsxr600b/w · 03-19-2005, 04:58 PM

i don't know if that bike has running lights but if there is 3 wires you picked the wrong one what type of bulbs leds or filment if they are led there is not enough resistance

flipmo · 03-19-2005, 05:53 PM

There is only two wires for the turn signals left side front and rear are black+ black w/ white tracer- on the right side light green+ black with white tracer-

2004gsxr600b/w · 03-20-2005, 08:47 AM

what type of bulbs are they led or standard

03-19-2005, 06:26 AM	#1 (permalink)
flipmo Newbie Joined: Mar 2005 Posts: 4	turn signal question I bought a 94 gsxr750 a couple of weeks ago when I bought it it did not have any turn signals on the bike. Since then I have installed turn signals this is the problem. The turn signals are solid they don't flash from right to left they just light up solid. I bought a new turn signal relay from the dealer thinking that was the problem put it in yesterday and nothing they are still solid no flashing so I'm back to step one. If anyone could help it would be thankful. Thanks flipmo

03-19-2005, 04:58 PM	#4 (permalink)
2004gsxr600b/w Newbie Joined: Mar 2005 Bike: 2004 gsxr 600 Location: central jerzey Posts: 16	i don't know if that bike has running lights but if there is 3 wires you picked the wrong one what type of bulbs leds or filment if they are led there is not enough resistance __________________ framesliders/huger/undertail/leds/tre /and more to come

03-20-2005, 08:47 AM	#6 (permalink)
2004gsxr600b/w Newbie Joined: Mar 2005 Bike: 2004 gsxr 600 Location: central jerzey Posts: 16	what type of bulbs are they led or standard __________________ framesliders/huger/undertail/leds/tre /and more to come

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
turn signal is out	envision1	Gixxer Mixer	7	06-01-2006 07:00 PM
Need Turn Signal Help	Joejitsu	Sportbikes & Sport-tourers	10	12-15-2005 08:58 PM
turn signal problem	customcracka	Sportbikes & Sport-tourers	4	12-08-2005 02:34 AM
Intruder 1500 Turn signal/Brake Light module Question	04SUZ	Cruisers	0	04-26-2005 07:54 PM
Turn Signal Replacement	Normal	Cruisers	3	10-23-2004 07:20 PM

03-19-2005, 11:27 AM	#3 (permalink)
flipmo Newbie Joined: Mar 2005 Posts: 4	Yes I did use the factory wiring and all the turn signals do the same thing front and back when you turn the signal on weather its the left or the right it is just solid no flashing. I replaced the bulbs in the instrument panel because one of them was blown I have voltage going to the lights they just don't flash what other info do you need. Thanks flipmo

03-19-2005, 05:53 PM	#5 (permalink)
flipmo Newbie Joined: Mar 2005 Posts: 4	There is only two wires for the turn signals left side front and rear are black+ black w/ white tracer- on the right side light green+ black with white tracer-

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)