Something's Happening . . . - Page 4 - Motorcycle-Journal Forums

**87gsxrnut** · 10-16-2007, 12:57 PM

We'll see how it plays out

- Nut

**drgibson** · 10-16-2007, 01:48 PM

Are you talking about MSR in Cresson or TMS.

kay · 10-16-2007, 01:51 PM

Quote:

Originally Posted by palanon

Thought so, the fender and forks through me off. Need to get you up here next year. Maybe a ride in for Laconia Bike week 6/14 - 6/22. There will be track days and racing all week. Would be nice to see two old school Gixxers on the track. You could use my shop and Tab and I would take care of ya.

MS and MJ Track Days. Ya Baby !!!!!!

I wanna be there too!
I can help you in the pit and also play the "screaming fan(s)" part.

**87gsxrnut** · 10-16-2007, 02:14 PM

MSR - that is the one South of Ft. Worth, right? Maybe Oak Hill.

- Nut

**drgibson** · 10-19-2007, 12:00 AM

Yeah, Never been to Oak Hill. [google] Hmm southeast of Tyler about 2 hours away.

**drgibson** · 10-19-2007, 12:02 AM

I just had a thought, how the heck does one who want's to take photos on a track like this get around? I can walk around a 1/2mile track that's level. These tracks are huge and many elevation changes.

Dad can I borrow the golf cart?

**87gsxrnut** · 10-19-2007, 12:51 PM

We'll figure out something. Photographers usually pick on corner for the morning sessions, and one for the afternoon.

- Nut

**87gsxrnut** · 03-02-2008, 08:06 PM

More updates:

Chain installed and adjusted, wiring harness all hooked up, new clutch slave cylinder hooked up and bled. Also filled her up with oil. All that is left to do is clean the carbs and get some air filters.

Getting there!

- Nut

omegajim · 03-02-2008, 08:09 PM

that frame is aluminum alloy, isn't it?

lookin good by and large.

**87gsxrnut** · 03-02-2008, 08:36 PM

Yep. One of the earliest aluminum frame mass-production bikes.

- Nut

omegajim · 03-02-2008, 09:49 PM

upside, light. downside, once the frame is sprung, it's toast.

what kind of mileage does this bike have on it again?

**87gsxrnut** · 03-02-2008, 11:06 PM

Naah, been wrecked at least twice, once by me. Had it straightened, raced it for another half a season plus extra track days. Still tracks straight. No idea on the mileage.

- Nut

10-16-2007, 12:57 PM	#61 (permalink)
87gsxrnut Ho Dog Join Date: Dec 2003 Bike: 867-5309 Location: Terror Lake Posts: 4,404	We'll see how it plays out - Nut __________________ Person or person's unknown.

10-16-2007, 01:48 PM	#62 (permalink)
drgibson Grandpa Before My Time Join Date: Jul 2005 Bike: 2008 Kawasaki KLR 650 Location: Dallas, Texas Directly above the center of the earth. Posts: 11,240	Are you talking about MSR in Cresson or TMS. __________________ *Real Men Drift on Two Wheels.*

10-16-2007, 02:14 PM	#64 (permalink)
87gsxrnut Ho Dog Join Date: Dec 2003 Bike: 867-5309 Location: Terror Lake Posts: 4,404	MSR - that is the one South of Ft. Worth, right? Maybe Oak Hill. - Nut __________________ Person or person's unknown.

10-19-2007, 12:00 AM	#65 (permalink)
drgibson Grandpa Before My Time Join Date: Jul 2005 Bike: 2008 Kawasaki KLR 650 Location: Dallas, Texas Directly above the center of the earth. Posts: 11,240	Yeah, Never been to Oak Hill. [google] Hmm southeast of Tyler about 2 hours away. __________________ *Real Men Drift on Two Wheels.*

10-19-2007, 12:02 AM	#66 (permalink)
drgibson Grandpa Before My Time Join Date: Jul 2005 Bike: 2008 Kawasaki KLR 650 Location: Dallas, Texas Directly above the center of the earth. Posts: 11,240	I just had a thought, how the heck does one who want's to take photos on a track like this get around? I can walk around a 1/2mile track that's level. These tracks are huge and many elevation changes. Dad can I borrow the golf cart? __________________ *Real Men Drift on Two Wheels.*

10-19-2007, 12:51 PM	#67 (permalink)
87gsxrnut Ho Dog Join Date: Dec 2003 Bike: 867-5309 Location: Terror Lake Posts: 4,404	We'll figure out something. Photographers usually pick on corner for the morning sessions, and one for the afternoon. - Nut __________________ Person or person's unknown.

03-02-2008, 08:06 PM	#68 (permalink)
87gsxrnut Ho Dog Join Date: Dec 2003 Bike: 867-5309 Location: Terror Lake Posts: 4,404	More updates: Chain installed and adjusted, wiring harness all hooked up, new clutch slave cylinder hooked up and bled. Also filled her up with oil. All that is left to do is clean the carbs and get some air filters. Getting there! - Nut __________________ Person or person's unknown.

03-02-2008, 08:09 PM	#69 (permalink)
omegajim M-J Lifetime Achievement Award Join Date: Jan 2007 Bike: 1980 Yamaha XS850 Location: Washington County, WI Posts: 10,401	that frame is aluminum alloy, isn't it? lookin good by and large. __________________ "FREE TIBET!"* With purchase of one Tibet of equal or greater value. "I have a driver's license. It doesn't mean I show up at the Indy 500 with my morgan." Ducky- NCIS and until very recently, we were Wisconsin Tourism Federation ----- no really.

03-02-2008, 08:36 PM	#70 (permalink)
87gsxrnut Ho Dog Join Date: Dec 2003 Bike: 867-5309 Location: Terror Lake Posts: 4,404	Yep. One of the earliest aluminum frame mass-production bikes. - Nut __________________ Person or person's unknown.

03-02-2008, 09:49 PM	#71 (permalink)
omegajim M-J Lifetime Achievement Award Join Date: Jan 2007 Bike: 1980 Yamaha XS850 Location: Washington County, WI Posts: 10,401	upside, light. downside, once the frame is sprung, it's toast. what kind of mileage does this bike have on it again? __________________ "FREE TIBET!"* With purchase of one Tibet of equal or greater value. "I have a driver's license. It doesn't mean I show up at the Indy 500 with my morgan." Ducky- NCIS and until very recently, we were Wisconsin Tourism Federation ----- no really.

03-02-2008, 11:06 PM	#72 (permalink)
87gsxrnut Ho Dog Join Date: Dec 2003 Bike: 867-5309 Location: Terror Lake Posts: 4,404	Naah, been wrecked at least twice, once by me. Had it straightened, raced it for another half a season plus extra track days. Still tracks straight. No idea on the mileage. - Nut __________________ Person or person's unknown.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)