Xerses

FYI, I appreciated your visual guide on how to install a PCIII - it came in very handy! However, I had a question/clarification on one section.

On page 9, you indicate that the front injector cable should be passed on the left side of the air intake. This is contrary to the DynoJet installation instructions, and made me nervous because right underneath it is all of the linkage for the throttle body. If the wire bundle ever got caught in the linkage (and it is about the right size to get caught), you could be stuck with the throttle jammed.

I routed it per the DynoJet instructions, along the right side. It made it a tiny bit harder to hook up the cables with my big fat fingers, but I was happier with the lesser chance of linkage problems.

Anyway, thanks again for all the work you put in to the guide - it was a huge help!!!