Navigator NV 531WK Fog Lights - Motorcycle Journal Photo Gallery

Some pix of my installations. Thanks again!

I wired the lights directly to the battery (behind the neck cover, under the gas tank, used some zipties). I put a toggle switch with rubber boot on the front side outer tool box cover. I drilled a small hole behind the inner tool box and ran the wires through that. I can't find a that pic. that I took, sorry about that. Post a pic of your lights once you've installed.

To line up the new lights I parked about 20' in front of the garage door and in the dark & turned on the lights. Then I adjusted the angle of each light to be just under the headlight beam.

Hey Nathan (God has given- hebrew)! I just bought another set of "fog lights" called Navigator but made by the same company - they WILL definitely fit, but they're actually a bit smaller than yours. The other ones are too wide.

Did you wire your lights to the headlight or directly to the battery? Where did you mount the light switch? If i recall it was mounted on the tool box (the pic is missing). Could you send me a picture?

Thanks.
Eusun

I was wondering if you had installed "stainless steel" 8mm bolts? My local hardware store didn't carry 'em. If so, where did you get them. Thanks.

Hi - how's it going? I'm planning on going to autozone to find the lights... do you remember what sized metric bolts you used? How did you know what size to get? Are your lights are bolted directly underneath without brace? What is a "lock washer"?