![]() |
![]() |
| Mechanics Corner Looking for answers to mechanical questions? Just can't get it to run right? Got a tip for increasing HP? This is your forum! |
|
Welcome to the Motorcycle-Journal Forums forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
![]() |
| | LinkBack | Thread Tools |
| | #1 (permalink) |
| Ditch Magnet ![]() Joined: Oct 2004
Bike: '97 Suzuki GSXF600
Location: Eastern PA
Posts: 166
| Bought a '97 Kat 600 about a month ago. Rode yesterday afternoon, and while parking at the end of the ride, noticed ... hey, what's this? ... damn, it's oil. No flames please ..... I know I should have looked before going for the ride. Anyway, there's still a decent oil level in the sightglass. Spent a while trying to figure out where it's coming from. Looks like the leak is somewhere on the left; drips down from the front plastic under the exhaust pipes. Was able to remove 6 of the 7 screws holding the left fairing in place, but don't have all the correct size allenheads, so couldn't remove the 7th. Have not bumped anything, so have no idea what caused the leak. Any ideas? Help. |
| | |
| | #2 (permalink) |
| Site Admin & Squeegee Boy ![]() Joined: Dec 1969
Bike: 2003 Volusia SE
Location: Montréal, Québec, Canada
Posts: 107
| At this stage only idea id for you to buy more allen wrenches to get fairing off.
__________________ Yadda yadda yadda, whatever, they ain't going to listen anyway. |
| | |
| | #3 (permalink) |
| In Training ![]() Joined: Oct 2004
Posts: 109
| Left side huh? could be just an overgreased chain, collecting the lubricant around the front sprocket and then dripping out. One of my bikdes suffered a bent clutch pushrod, easily replaced along with the seal. left side could also behind the front sprocket. Yes you sure need some metric tools if you plan on riding a Jap bike. |
| | |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Diff Leak | Toolboy | Marauder M50 Secret Hideaway | 17 | 05-25-2006 03:19 AM |
| Leak from hole | boonders | Mechanics Corner | 6 | 03-25-2006 11:52 AM |
| compression leak | viper94bite | Mechanics Corner | 1 | 03-09-2006 11:41 AM |
| slow air leak | andymetzger | Mechanics Corner | 3 | 02-08-2006 08:05 PM |
| Vacuum Leak? | Ace4090 | Mechanics Corner | 2 | 09-28-2005 12:25 AM |