|
|
| Mechanics Corner Looking for answers to mechanical questions? Just can't get it to run right? Got a tip for increasing HP? This is your forum! |
 |
| | LinkBack | Thread Tools |
09-24-2008, 11:12 PM
| #1 (permalink) |
| Newbie Join Date: Sep 2008
Posts: 1
|  1991 250 Nighthawk No spark
I have a 1991 250 nighthawk which has no spark. I tried new plugs and fiddling with the kill switch and the kick stand and still I have no sign of spark. The bike has a new battery and has 3100 miles on it. I purchased a manual and did the checks outlined in the book. I Ohmed all the wires on the cdi except the wire that comes from the stator since it didn't have a spec for that. the coils and the pulse phaser which were both in spec according to the book and it says that if both of them are good the cdi is bad. According to the book the ground is good, kill/ignition switch good, coils good, and pulse phaser good. So I purchased a cdi and tried it and still no spark. Thanks  |
