Rear Filler Plates for sale - Page 10 - Motorcycle-Journal Forums

wdlsmaerw · 10-26-2009, 09:04 PM

Finally got some time to put the part on. Fit on nice and easy. Thanks. I will try and get you some more of the before and afters later.

The Dark Knight · 10-27-2009, 10:43 AM

good deal.. it looks like it needs to be curved some.. i cant tell.. the last batch i did i left enough room to put washers in the side bolts to space it...

did you un screw the two screws in the taillight houseing and fasten it there also or just use the side bolts only?

it should look like the one below (picture of GeorigaRollers install)

FastCougar · 10-27-2009, 11:18 AM

sorry for the off-topic nature of this question, but where did you get your side plate holder?

fargoben67 · 10-27-2009, 12:03 PM

you can find them all over ebay for $25. the one i got was for a harley so i had to take a dremel and make the hole bigger to fit the bolt in the final drive housing. took about 5 minutes to dremel it.

wdlsmaerw · 10-27-2009, 10:27 PM

I used all 4 bolts to attach it. It could use a little rounding, but I think it is more the picture that makes it look like its flat. The left side is just under a 1/4 short of the bumper, where as the right is right on, almost kind of rubbing the bumper. No worries, something to work on later and I'm thinking of changing the paint job anyway. And to be honest it's a lot better than I could ever do with fabrication.

As for the plate holder...I cant remember. I had a buddy pick it up for me and the tag is still at his place. See if I cant find out. I like it. It's simple and metal, no plastic crap or big thick wasted space.

The Dark Knight · 10-28-2009, 10:47 AM

i made the one on my bike..

The Dark Knight · 10-28-2009, 10:49 AM

Yea i figured there would be some slight variance in each bike.. and of course in fabing these all up.. its easy to enlarge a hole a little and curve it and roll the corners some.. but im glad you like it

DesertCoug · 11-16-2009, 01:35 PM

Here is what my rear filler plate looks like. Plus, what a side license would look like with saddle bags.

The Dark Knight · 11-19-2009, 09:11 AM

Looking Good Desert Coug...

Ive got one left i need to sell..

GeorgiaRoller · 11-19-2009, 03:17 PM

I thought you might appreciate these bikes. Check out the speedo reading at the 4 minute mark of the vid.

IMPORTANT NOTICE: This media file is hosted outside Motorcycle-Journal forums. By clicking the link below you agree to view content from an external website. We can not be held responsible for the suitability or legality of this material. If the video does not play, wait a minute or try again later.

I AGREE

FastCougar · 11-19-2009, 03:45 PM

Wow, makes 110 look lame and tame!

10-26-2009, 09:04 PM	#181 (permalink)
wdlsmaerw Newbie Join Date: Sep 2009 Bike: 2009 Suzuki M50 Special Edition Location: Colorado Posts: 6	Finally got some time to put the part on. Fit on nice and easy. Thanks. I will try and get you some more of the before and afters later. Attached Thumbnails

10-27-2009, 10:43 AM	#182 (permalink)
The Dark Knight TurtleWax Taster Join Date: Jul 2008 Bike: Suzuki Boulevard M50 Location: Central Oklahoma Posts: 572	good deal.. it looks like it needs to be curved some.. i cant tell.. the last batch i did i left enough room to put washers in the side bolts to space it... did you un screw the two screws in the taillight houseing and fasten it there also or just use the side bolts only? it should look like the one below (picture of GeorigaRollers install) Attached Thumbnails Last edited by The Dark Knight; 10-27-2009 at 10:48 AM.

10-27-2009, 12:03 PM	#184 (permalink)
fargoben67 Fender Buffer Join Date: Sep 2008 Bike: 2008 Boulevard M50 Black and Yellow Location: fargo nd Posts: 436	you can find them all over ebay for $25. the one i got was for a harley so i had to take a dremel and make the hole bigger to fit the bolt in the final drive housing. took about 5 minutes to dremel it. __________________ 2008 Black on yellow M50 ~ Cobra Streetrod Slashdowns ~ FI2000R ~ removed air cleaner ~ de-paired ~ de-flectored ~ 3" drop ~ JK forward controls ~ curved side mount license plate ~ integrated tail light ~ Jardine sissy bar ~ always looking for more stuff to add! so i broke my leg in 3 places... got a few screws, couple plates and a big rod in my leg now... guess my riding season is over!

10-28-2009, 10:47 AM	#186 (permalink)
The Dark Knight TurtleWax Taster Join Date: Jul 2008 Bike: Suzuki Boulevard M50 Location: Central Oklahoma Posts: 572	i made the one on my bike.. Last edited by The Dark Knight; 10-28-2009 at 10:50 AM.

11-16-2009, 01:35 PM	#188 (permalink)
DesertCoug Newbie Join Date: Jul 2009 Bike: 2006 Suzuki Boulevard M50 Location: Moses Lake WA Posts: 20	Here is what my rear filler plate looks like. Plus, what a side license would look like with saddle bags. Attached Thumbnails __________________ 2006 M-50 (Power Commander III, V&H Cruzers, K&N Filter w/ Modified Air Box, Side License Mount, Mustang Seats, GPS Mount, Rear Floorboard, De-badged, Rear Filler Plate, Integrated Tail Light, Flexible LED Turn Signal, Naked Juggs) Upcoming Mods (Chroming Motor, Tank Bra)

10-27-2009, 11:18 AM	#183 (permalink)
FastCougar Seat Tester Join Date: Aug 2009 Bike: 2005 Suzuki M50 Location: Martinsburg, WV Posts: 96	sorry for the off-topic nature of this question, but where did you get your side plate holder?

10-27-2009, 10:27 PM	#185 (permalink)
wdlsmaerw Newbie Join Date: Sep 2009 Bike: 2009 Suzuki M50 Special Edition Location: Colorado Posts: 6	I used all 4 bolts to attach it. It could use a little rounding, but I think it is more the picture that makes it look like its flat. The left side is just under a 1/4 short of the bumper, where as the right is right on, almost kind of rubbing the bumper. No worries, something to work on later and I'm thinking of changing the paint job anyway. And to be honest it's a lot better than I could ever do with fabrication. As for the plate holder...I cant remember. I had a buddy pick it up for me and the tag is still at his place. See if I cant find out. I like it. It's simple and metal, no plastic crap or big thick wasted space.

10-28-2009, 10:49 AM	#187 (permalink)
The Dark Knight TurtleWax Taster Join Date: Jul 2008 Bike: Suzuki Boulevard M50 Location: Central Oklahoma Posts: 572	Yea i figured there would be some slight variance in each bike.. and of course in fabing these all up.. its easy to enlarge a hole a little and curve it and roll the corners some.. but im glad you like it

11-19-2009, 09:11 AM	#189 (permalink)
The Dark Knight TurtleWax Taster Join Date: Jul 2008 Bike: Suzuki Boulevard M50 Location: Central Oklahoma Posts: 572	Looking Good Desert Coug... Ive got one left i need to sell..

11-19-2009, 03:45 PM	#191 (permalink)
FastCougar Seat Tester Join Date: Aug 2009 Bike: 2005 Suzuki M50 Location: Martinsburg, WV Posts: 96	Wow, makes 110 look lame and tame!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DJ's Rear Drive Mod for sale	techgesture	Marauder M50 Secret Hideaway	13	09-16-2009 08:18 PM
c109r filler cap	ridingguy	The Boulevard	8	04-13-2009 06:07 PM
m50 rear fender for sale	hilomx6	Marauder M50 Secret Hideaway	1	02-03-2009 09:01 AM
GS750 smoke in the oil filler	garp	Mechanics Corner	2	06-29-2007 07:12 PM
GN 250 Clutch plates	Inventor of the GNX	Suzuki	0	10-30-2006 09:50 PM