|
|
| Marauder M50 Secret Hideaway It's for Marauder M50 owners! |
 |
| | LinkBack | Thread Tools |
03-08-2009, 11:42 AM
| #1 (permalink) |
| U.B's LoveChild   Join Date: Jun 2008
Bike: 2005 M50 PCIII K&N Thunder intake kit,custom pipes wrapped,DE-paired,side plate LED METZ 200
Location: Cincinnati,Ohio
Posts: 1,214
 |  Clutch adjustment with pics
1.Remove the left side engine cover. 4 mm hex wrench required. 2.Remove the left side clutch cover. 10 mm socket required. 3.Loosen the clutch cable at the engine...screw it all the way in. 4.Loosen the clutch cable at the handlebar. screw it all the way in. 5.Loosen the 10 mm nut holding the adjustment screw tight. 6.Turn the adjuster bolt clockwise until you feel tension. 7.Back that bolt out 1/8-1/4 turn. 8.Tighten the nut back up. 9.Reverse steps 1-2. 10.Roughly adjust the cable at the engine until you feel SLIGHT tension. 11.You can then fine tune your clutch adjustments at the handlebars to your liking. This I would rate a 2 out of 5 wrenches difficulty. Should take less then 20 minutes. CS |
