Morton Violaters - Motorcycle-Journal Forums

jman109r · 07-25-2008, 11:01 AM

My bro just bought the Mortons. Were going to install them today, no directions came with them. Does anyone have these pipes that could give us some tips. Do they need gaskets? Any help would be great. Thanks in advance.

GeorgiaRoller · 07-25-2008, 01:24 PM

Quote:

Originally Posted by jman109r

My bro just bought the Mortons. Were going to install them today, no directions came with them. Does anyone have these pipes that could give us some tips. Do they need gaskets? Any help would be great. Thanks in advance.

I have V&H pipes not the Mortons but in my humble opinion anytime you change to different pipes I would reccomend new gaskets. They around $6-$7 bucks each. Once you pull off your stock pipes you'll have to carefully dig under the black exaust residue to find the original ones in the cyclinder head and pull them out with needle nose plyers. After you install the new gaskets have your brother hold the pipe in place and then you tighten the two bolts (don't overtighten them or bend the bracket). After your first ride and the pipes have heated and expanded then recheck the bolts. Good Luck!

Do a search for "exhaust gaskets" and you'll find a thread with pixs on how to replace the gaskets.

GeorgiaRoller · 07-25-2008, 01:38 PM

Check out this old link http://www.motorcycle-journal.com/fo...xhaust+gaskets

GeorgiaRoller · 07-25-2008, 01:55 PM

Link above doesn't work. Here's my last attempt at this http://www.motorcycle-journal.com/fo...xhaust+gaskets

07-25-2008, 11:01 AM	#1 (permalink)
jman109r Newbie Joined: Jun 2008 Bike: '06 M109r Location: Pittsburgh Pa Posts: 16	Morton Violaters My bro just bought the Mortons. Were going to install them today, no directions came with them. Does anyone have these pipes that could give us some tips. Do they need gaskets? Any help would be great. Thanks in advance. __________________ '06 M109R Debadged, Debeavered, PCIII, Side mount plate, JSD3M, Holley air intake mod, Stebel horn, GPS system, Kuryakin iso grips w/tips, Kury mirrors, Kury caliper cover, Drilled pipes.

07-25-2008, 01:38 PM	#3 (permalink)
GeorgiaRoller Fifth gear streak Joined: May 2008 Bike: Twisted 05 M50 Location: Barnesville, GA Posts: 1,363	Check out this old link http://www.motorcycle-journal.com/fo...xhaust+gaskets __________________ Skull Graphics - Depaired - Vance & Hines Cruzers - Thunder Charged Air Kit - Cobra FI2000R - J/K 2-1/2" Drop - J/K Forward Controls - Integrated Tail Light - Mustang Seat & Fender Bib - Boulevard Tank Bra - Grasshopper Driver Backrest - Kury Iso Grips w/Baron Bullet Ends - Memphis Shades Pop-Top - Side Mount Plate.

07-25-2008, 01:55 PM	#4 (permalink)
GeorgiaRoller Fifth gear streak Joined: May 2008 Bike: Twisted 05 M50 Location: Barnesville, GA Posts: 1,363	Link above doesn't work. Here's my last attempt at this http://www.motorcycle-journal.com/fo...xhaust+gaskets __________________ Skull Graphics - Depaired - Vance & Hines Cruzers - Thunder Charged Air Kit - Cobra FI2000R - J/K 2-1/2" Drop - J/K Forward Controls - Integrated Tail Light - Mustang Seat & Fender Bib - Boulevard Tank Bra - Grasshopper Driver Backrest - Kury Iso Grips w/Baron Bullet Ends - Memphis Shades Pop-Top - Side Mount Plate.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Morton Violators - Installed - Pics	hobbz	Marauder M50 Secret Hideaway	42	10-08-2008 03:54 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)