More Pics of Riser spacers - Page 4 - Motorcycle-Journal Forums

DNW VZ800 · 02-22-2009, 10:54 PM

...Just want to say thanks Jeff.....installed the raisers tonight in about 40 minutes.....your step by step instructions were great.....and....excellent quality work....thanks again....

So what you making next......

07M50Limited · 03-02-2009, 03:24 PM

Quote:

Originally Posted by DNW VZ800

...Just want to say thanks Jeff.....installed the raisers tonight in about 40 minutes.....your step by step instructions were great.....and....excellent quality work....thanks again....

So what you making next......

Glad it went so smooth

Next...project, lol...will definitely be made of metal, been working on crown molding around the house, ...about the only cool thing about doing that, is the nail gun....

Enjoy
Jeff

dmack · 03-02-2009, 08:19 PM

How much and do you have more???????

07M50Limited · 03-02-2009, 09:07 PM

email me I have a few sets left
Flameredrt@hotmail.com

05HDRAM · 03-03-2009, 06:31 AM

Quote:

Originally Posted by dmack

How much and do you have more???????

I say get a set while you can, they are really nice. Install is real easy if you take your time. Unfortunately I forgot to put the washers back under the spacers, so I added 10 minutes to pop them back off and fix my mistake.

italian biker · 04-17-2009, 08:48 AM

Another installation tip:
Removing one riser at a time, putting it in a vise(just enough to hold it, padded with fleece), and remove the old stud, install the new stud. For 11 bucks at NAPA, I bought socket shaped stud remover, and used my breaker bar.
How I did it: I removed the nuts holding the handle bars to the tree, lifted the bars off the tree, then turned the bar so that one stud went back in the hole, letting the bar rest on one riser, and the other stud infront of the tree(be careful of the headlight, and still cover the tree). Removed the riser(only three screws, two on top, and one underneath for the speedometer bracket. Reinstall the riser to the handle bar, lift the bar, and install the spacer. Rest the bar on the new riser/spacer combo throught he hole in the tree, and repeat the steps for the other riser. Since I only did one at a time, I didn't need to remove the speedometer or controls.

DocStark · 04-18-2009, 12:45 PM

those spacers look good, i need to get me a set, email already sent to 07M50limited...hopefully theres at least one left

07M50Limited · 04-18-2009, 10:43 PM

Quote:

Originally Posted by DocStark

those spacers look good, i need to get me a set, email already sent to 07M50limited...hopefully theres at least one left

I sent you a email

CYNWAGON · 04-21-2009, 06:18 PM

Just sent an e-mail.

robjiii · 04-21-2009, 10:50 PM

call me stupid but what will risers do for me? i an new to the whole bike thing

07M50Limited · 04-21-2009, 10:55 PM

Quote:

Originally Posted by CYNWAGON

Just sent an e-mail.

Replied

07M50Limited · 04-21-2009, 10:58 PM

Quote:

Originally Posted by robjiii

call me stupid but what will risers do for me? i an new to the whole bike thing

They will give you pullback on the bars, if needed for reach, or give extra clearance for drag bars.
Check this out...Thanks to vagabond35
http://www.motorcycle-journal.com/fo...tml#post519028

There is some more pic's in that thread also

If your interested email me Flameredrt@hotmail.com

dreygun · 04-23-2009, 06:33 AM

What an easy install! Only due to the clear instructions from jeff. Items came across the border fast and were a perfect fit. With my drag bar and stick risers, my brake/ throttle lines would hit the tank. Now there's a nice 1" clearance and I can sit back a little comfortably. 10/ 10 for product quality and clear instructions. Can't thank you enough!

CooleyM50 · 06-21-2009, 01:06 AM

Any more risers left?

Quantumcat · 06-22-2009, 06:08 PM

Those look great 07M50L. Even after "rolling" the bars back towards me, I find the riding position a little more "aggressive" than I'd like. I've sent an e-mail hoping that you may still have a set laying around.

Thanks for making these available to others.

BLADE RUNNER · 06-22-2009, 06:32 PM

I believe I've already touched base with you to determine if you have any risers left and if I'm not mistaken you said you did not and that you weren't planning on making any more.

Based on the renewed interest just hoping you might change your mind and make up a few more for some of us Newbeez who just arrived in the forum.

If not....understandable and you won't hear a peep out of me again on the subject.....if so...bless you bless you. lol*

Seriously...you've got a gift and a talent. Seems like a waste not to use it. I bet there are alot of M50 owners out there in EBay-Land who would want a set.

Maybe just make them to order rather than invest in a whole slew upfront ?

Anyways thanks for letting me rant.

Cheers

07M50Limited · 06-22-2009, 07:28 PM

Sorry, they are all gone, and I lost my job.
Not sure if I will get to make any more.
If things change, I will try and do another batch, I have have 10 or so emails, and cant help anyone right now, hope you all understand.
Jeff

Quantumcat · 06-22-2009, 08:06 PM

Certainly Jeff. I understand.

Sorry to hear you lost your job.

Best of luck. Keep your head up and your shoulders back.

CooleyM50 · 06-24-2009, 06:28 PM

Risers available again.

Jeff and I are working to make the Risers he made available again.

I need to see a count of raised hands for who would be interested in purchasing sets of risers.

If I get enough interested I will set up to do a larger batch run.

Thanks,

Ken Cooley
ken@shape-master.com

Send me an email, put RISERS in your Subject line

ranline · 06-24-2009, 10:50 PM

Email sent to Ken Cooley.

I'm in for a set.

Randy

02-22-2009, 10:54 PM	#61 (permalink)
DNW VZ800 Fender Buffer Join Date: Oct 2008 Bike: 08 V-Star 1300T Location: Guelph, Ontario Posts: 403	Custom raisers installed.......... ...Just want to say thanks Jeff.....installed the raisers tonight in about 40 minutes.....your step by step instructions were great.....and....excellent quality work....thanks again.... So what you making next...... __________________ 2008 V-Star 1300T

03-02-2009, 09:07 PM	#64 (permalink)
07M50Limited Fifth gear streak Join Date: May 2008 Bike: 2007 M50 limited Location: Monroe N.C. Posts: 1,372	email me I have a few sets left Flameredrt@hotmail.com __________________ 2007 M50 Limited, Silver with Tribal FlamesCustom Made Riser SpacersCustom Made Light Bar and Turn Signal Relocate * Hella Driving Lights and AutoSwitchJK Forward Controls

04-17-2009, 08:48 AM	#66 (permalink)
italian biker Found second gear by accident Join Date: Mar 2006 Bike: 2006 M50, Blue Location: Toledo Posts: 305	Another installation tip: Removing one riser at a time, putting it in a vise(just enough to hold it, padded with fleece), and remove the old stud, install the new stud. For 11 bucks at NAPA, I bought socket shaped stud remover, and used my breaker bar. How I did it: I removed the nuts holding the handle bars to the tree, lifted the bars off the tree, then turned the bar so that one stud went back in the hole, letting the bar rest on one riser, and the other stud infront of the tree(be careful of the headlight, and still cover the tree). Removed the riser(only three screws, two on top, and one underneath for the speedometer bracket. Reinstall the riser to the handle bar, lift the bar, and install the spacer. Rest the bar on the new riser/spacer combo throught he hole in the tree, and repeat the steps for the other riser. Since I only did one at a time, I didn't need to remove the speedometer or controls. __________________ 2006 M50, blue, Power Commander III, Kury Hyper Charger, Roadhouse Classic 2:1 exhaust. Kury ISO Grips with matching throttle boss on both grips, Kury Dually ISO rider pegs. Memphis Shades Alley Cat(gradient black), Cobra Sissybar, Cobra luggage rack, saddle bags are from a small company in Newark, Ohio

04-21-2009, 10:50 PM	#70 (permalink)
robjiii Newbie Join Date: May 2008 Bike: 08 Suzuki M50 Location: Toney AL Posts: 22	call me stupid but what will risers do for me? i an new to the whole bike thing __________________ Rob Living to Ride Riding to Live 2008 M50 Black my 1st road Bike changes/added on's rolled handle bars out more debadged to do's Cobra Round Sissy Bar Short Kuryakyn Swingwing Pegs/Adapters Mustang Vintage Wide Touring Seat Set pipes???? LED Kit

04-23-2009, 06:33 AM	#73 (permalink)
dreygun Found second gear by accident Join Date: Aug 2008 Bike: 2006 Dust Black M50 Location: barrie, ontario, canada Posts: 340	What an easy install! Only due to the clear instructions from jeff. Items came across the border fast and were a perfect fit. With my drag bar and stick risers, my brake/ throttle lines would hit the tank. Now there's a nice 1" clearance and I can sit back a little comfortably. 10/ 10 for product quality and clear instructions. Can't thank you enough! __________________ Tom Poh @ Dreygunz Decalz Custom Stickers/ Banners 2006 dust black debadged M50/ kury iso-grips ( with throttle boss, grip spikes, front & back pegs, clutch & brake covers)/ chrome accents (oil and brake cap)/ garmin Zumo 550 Gps/ Stock pipes (debaffled, demickey'd, blacked out header side)/ leather saddlebags & supports/ sissy bar & rack/ memphis fat 13" clear/ roadrunner cup holder/ HD fork pouch/ PC3/ 32" drag bar/ sidemount curved plate mount/ clear signals/ johnskit 3in lowering/ chrome rad cover/ Integrated signal back light kit/ removed OEM back signals and license housing/ Sickle Stem Lucifer Mirrors/ kury ultra tour bag/ JK's forward controls, GMAN's lean angle draggers (gen2), "07M50Limited" riser spacers. Coming soon: Custom leather saddle seat, Thunder Air/ adaptor, Morton violator/ Highway Hawks exhaust

03-02-2009, 08:19 PM	#63 (permalink)
dmack In Training Join Date: Jul 2008 Bike: 2005 suzuki m50 Location: Kentucky Posts: 113	How much and do you have more???????

04-18-2009, 12:45 PM	#67 (permalink)
DocStark Ditch Magnet Join Date: Oct 2007 Bike: '07 M50 Location: from neosho, mo....just got transfered to hawaii Posts: 163	those spacers look good, i need to get me a set, email already sent to 07M50limited...hopefully theres at least one left

04-21-2009, 06:18 PM	#69 (permalink)
CYNWAGON Newbie Join Date: Aug 2008 Bike: 08 Suzuki M50 Location: Millet, Alberta Posts: 23	Just sent an e-mail.

06-21-2009, 01:06 AM	#74 (permalink)
CooleyM50 Clunked into first gear Join Date: Jun 2009 Bike: Suzuki Boulevard M50 Location: St. Joseph, IL Posts: 219	Any more risers left?

06-22-2009, 06:08 PM	#75 (permalink)
Quantumcat Clunked into first gear Join Date: Jun 2009 Bike: 2007 M50 Black Location: Seattle, WA USA Posts: 235	Those look great 07M50L. Even after "rolling" the bars back towards me, I find the riding position a little more "aggressive" than I'd like. I've sent an e-mail hoping that you may still have a set laying around. Thanks for making these available to others. __________________ Experience is the comb that Life gives you after you've lost your hair. 2007 M50 Black - Debaffled w/6" Fibrosleeves ~ 1" Riser Spacers ~ ISO Grips w/Throttle Bosses & Baron Bullet Endcaps ~ ISO Pegs & Shifter ~ Willie & Max Raptor Saddlebags ~ Debadged ~ Iridium Plugs ~ Factory Wire Rack, Tank Bib & Case Guards ~ Black Vinyl Wrapped Forks (pipes, hypercharger, FI controller and tach to come - hopefully)

06-22-2009, 06:32 PM	#76 (permalink)
BLADE RUNNER Seat Tester Join Date: Apr 2009 Bike: 2007 Suzuki Boulevard M50 Location: Toronto Ontario CANADA Posts: 59	I believe I've already touched base with you to determine if you have any risers left and if I'm not mistaken you said you did not and that you weren't planning on making any more. Based on the renewed interest just hoping you might change your mind and make up a few more for some of us Newbeez who just arrived in the forum. If not....understandable and you won't hear a peep out of me again on the subject.....if so...bless you bless you. lol* Seriously...you've got a gift and a talent. Seems like a waste not to use it. I bet there are alot of M50 owners out there in EBay-Land who would want a set. Maybe just make them to order rather than invest in a whole slew upfront ? Anyways thanks for letting me rant. Cheers __________________ BLADE RUNNER "Ride, Eat, Sleep, Repeat"

06-22-2009, 07:28 PM	#77 (permalink)
07M50Limited Fifth gear streak Join Date: May 2008 Bike: 2007 M50 limited Location: Monroe N.C. Posts: 1,372	Sorry, they are all gone, and I lost my job. Not sure if I will get to make any more. If things change, I will try and do another batch, I have have 10 or so emails, and cant help anyone right now, hope you all understand. Jeff __________________ 2007 M50 Limited, Silver with Tribal FlamesCustom Made Riser SpacersCustom Made Light Bar and Turn Signal Relocate * Hella Driving Lights and AutoSwitchJK Forward Controls

06-22-2009, 08:06 PM	#78 (permalink)
Quantumcat Clunked into first gear Join Date: Jun 2009 Bike: 2007 M50 Black Location: Seattle, WA USA Posts: 235	Certainly Jeff. I understand. Sorry to hear you lost your job. Best of luck. Keep your head up and your shoulders back. __________________ Experience is the comb that Life gives you after you've lost your hair. 2007 M50 Black - Debaffled w/6" Fibrosleeves ~ 1" Riser Spacers ~ ISO Grips w/Throttle Bosses & Baron Bullet Endcaps ~ ISO Pegs & Shifter ~ Willie & Max Raptor Saddlebags ~ Debadged ~ Iridium Plugs ~ Factory Wire Rack, Tank Bib & Case Guards ~ Black Vinyl Wrapped Forks (pipes, hypercharger, FI controller and tach to come - hopefully)

06-24-2009, 06:28 PM	#79 (permalink)
CooleyM50 Clunked into first gear Join Date: Jun 2009 Bike: Suzuki Boulevard M50 Location: St. Joseph, IL Posts: 219	Risers available again Risers available again. Jeff and I are working to make the Risers he made available again. I need to see a count of raised hands for who would be interested in purchasing sets of risers. If I get enough interested I will set up to do a larger batch run. Thanks, Ken Cooley ken@shape-master.com Send me an email, put RISERS in your Subject line

06-24-2009, 10:50 PM	#80 (permalink)
ranline Newbie Join Date: Jun 2008 Bike: M50 2008 Location: Wasington State Posts: 20	Risers for M50 Email sent to Ken Cooley. I'm in for a set. Randy

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Email was sent to everyone on list for Riser Spacers	07M50Limited	Marauder M50 Secret Hideaway	6	06-15-2008 10:49 PM
Riser Spacers	07M50Limited	Marauder M50 Secret Hideaway	6	06-15-2008 08:23 AM
phat riser	khoysagk	Volusia/C50 Getaway	1	11-02-2007 09:01 PM
Need spacers for rear wheel 89-96 Katana	dig dug mx6	Gear, Parts and Accessories Buy / Sell / Trade	0	01-26-2006 11:21 PM
Jim's Marauder Spacers	Spacer Jim	Cruisers	4	01-30-2005 08:42 AM