More Pics of Riser spacers

[DaveAlvarado]

Man, I really screwed up buying all these mods in the summertime when it's hot and I don't want to sit in my garage working on my bike.

[spazmatron]

Do you still have more risers what is the cost?

[07M50Limited]

Originally Posted by spazmatron

Do you still have more risers what is the cost?

Send a email here and I will send the info, I still have some left.
FlameRedRT@hotmail.com

[spazmatron]

Hook me up I need risers bad!! I added a corbin seat and now the bars are to far forward.

[Mad Gord]

Oops, I owe someone a beer when they come through Surrey B.C.!! I was a dollar short!
better hit me up... I allways have beer, except when i'm going to get more!..

thanks jeff

[07M50Limited]

Originally Posted by Mad Gord

Oops, I owe someone a beer when they come through Surrey B.C.!! I was a dollar short!
better hit me up... I allways have beer, except when i'm going to get more!..

thanks jeff

Thats the sprit, buy one for the visit'er

[andersenj]

Hello All,

I have had my M50 for a couple of years and really like the ride. However, I do not have "gorilla" arms and am a little stretched by the present placement of the handlebars. And it would seem that nobody has pre-made risers or spacers for the M50. In fact I am disappointed in the lack of aftermarket products for this line. I saw a poster to this forum that has made some custom spacers for the M50 and would like to see how to get a set.

Thanks,
Jerry

[coolal357]

Received riser spacers and installed today. Had my son help out and found that removing the 2 10mm bolts holding the cables made install much easier! someone had already tried this, so I did same. I taped the spacers and used a little (fun tack) to hold the washer and rubber gasket in place to re-install bars to be helpful, also the extra hands cut down on time about 20 mins. start to finish great part! rides totally different! Big thanks for this part!

[dreygun]

those look very well made! might need a set if the drag bar ordered sits too far forward. good job!

[M50DPE]

Just wanted to thank you again MJ for the risers. I just installed them this week, and took the bike for a few short rides and a 150 trip. I have to admit that I didn't expect much from them when I saw them, but after installing them and taking the rides, I noticed a huge change in the way I feel on the bike. I really felt the change during my long ride. I painted them black and clear coated them. Thanks again for a great product.

[07M50Limited]

TY

[theschist]

Hello everyone. This is my first time posting on this site. I have read almost everything and am excited by all the ideas. Anyhow, I just installed 32" drag bars. Love em' but as you all know, I got clearance issues. Also, I am 5'11" and although reach is not an issue, I would like a more relaxed riding position (the whole reason I got an M50). Does anyone have a set of riser spacers from 07M50Limited that they would like to sell. I contacted him, but he is out. 07M50Limited, if you made another run of those, I am sure you could sell them all.

[spainbiker]

If you do spacers for the other end of the risers (up) , let me know . it would be better for the whole view of the bike and it would get back the handlebar nearest .

[vagabond35]

So, is there a waiting list for the risers? I want on it.

[07M50Limited]

No....there is no waiting list.
Im still looking for a machine shop, that would like to take this over, I even ask John at Johnskit...If any one knows of a shop, I will sell the programs, to them cheap, Maybe $100.00 just to cover some of the time I spend, on them.
I just dont have the time, and Im working on a few other things.

[07M50Limited]

Originally Posted by spainbiker

If you do spacers for the other end of the risers (up) , let me know . it would be better for the whole view of the bike and it would get back the handlebar nearest .

You can buy those, they have been around for a long time, BUT...you will lose the speedo mount, because the way the bars fit under it.
Here are ones for the M109, they are 1" bars also, dont know if hole spacing is the same, but I have a feeling they are.
http://a763.g.akamai.net/7/763/1644/...p/VPID/2692352

And here is ones for a C90, that might fit.....
http://www.1cruiser.com/sa/cart/deta...-95DFE2AA7E0F}

[spainbiker]

Thanks a lot!
( i didnt yhink about it ) ..but i think it has solution.
The question is...those..have the same curves and form like the M50 risers?

(sorry for my bad english) :p

[07M50Limited]

Going to bump this up.
I will be ordering everything for one last batch of riser spacers, before I trade my M50 in. Then I will be busy working on projects for the M90.
YoungBloodM50 has a list going in the buy and sell thread, make sure you get on it, before its to late.

[cardude720]

how easy are these to install? Just the bolts under them?

[07M50Limited]

Originally Posted by cardude720

how easy are these to install? Just the bolts under them?

They are very easy to install, the only hard part, is removing the studs, from the stock risers, if you have a set, they went crazy with the loc-tight.
Some come out real easy, some need a pipe wrench or stud remover.
Read the threads, there is alot of tips, on removing them.
http://www.motorcycle-journal.com/fo...tall-tips.html