hello everyone! Can't recall reading anything about little defect on my '06 m-50. Seems bottom mount screw for removing turn signal lense to r&r bulb, were a little over torqued from manufacturer. Discovered while washing my bike, right rear lense fell off bike with little pressure from wash mitt. Screw at bottom of each lamp assembly screws into plastic housing of lense. Plastic housing was broken in three of my lamp assemblies, one screw was missing completely. Quick fix I used clear rubber adhesive(rtv) just on the bottom of lense, since top of lense has key-way fit in assembly, also put a small dab in screw hole since mount screws were useless with broken housing. Might want to check your mount screws by tightening them a little if they just keep turning without tightening they are broken inside, don't want anyone to lose an amber lense on highway.....
07-17-2007, 03:58 PM
check turn signal lenses 
