Melting Headlight lenses with brigher bulbs - Still an issue? - Motorcycle-Journal Forums

old new biker · 06-24-2007, 02:41 PM

I am planning to put a brighter bulb in my headlight, and after pounding through many threads regarding this subject, I found where in some cases where the Headlight Reflector and/or Lens are plastic, that a higher wattage bulb would melt them.

Does this apply to the M50 or is it save to put in any of the many bulbs used by members of this forum?

Thanks for any conformation.

old new biker · 06-25-2007, 02:04 PM

Bump,

Someone has to know if this was ever resolved or not, the other thread that dealt with this just stopped, right when it appeared that is might have been resolved. It was never confirmed, however.

Anyone??????????????????

Frizzy79 · 06-25-2007, 02:14 PM

I would assume as long as you use a standard 55/60 watt bulb you would be fine. The Piaa bulbs that I use are 55/60, but with 125/135 light output. In other words the bulb is for all intensive purposes the same as stock, yet much brighter and more clear.. I had a Honda Civic SI that I put 100 watt bulbs in and it melted the wiring harness, so I went with Plasma lights with the same wattage as stock, but higher light output and it worked very well..

SNAFU · 06-25-2007, 06:44 PM

I think there are a few members who have changed to Sylvania SilverStar H4ST bulbs. I don't know if there are any melting issues with these.

RedFifty · 06-26-2007, 12:37 AM

I use the Silverstar. I've had no problems with melting but they do not last as long as stock. I had to replace mine (with another Silverstar) after about a year. They are significantly brighter and worth it, in my opinion. -Red

RicoChet · 06-26-2007, 01:25 AM

I can definitely vouch for the H4 Sylvania Silverstar bulb... Noticeably brighter and whiter then a regular stock bulb, much better for visibility.

devilboy26 · 06-26-2007, 06:20 AM

Same Here! Replaced my stock with the Sylvania and it is SUPER bright!
When I ride alone(not group) I use the high beam and often get flashed by cars that dont like my BRIGHT light ! Anything we can do to be seen better is a plus! I bought the 2 pack so I have an extra,still going strong since Dec 06.

Mavman · 06-26-2007, 08:52 AM

I've posted this before concerning brightness, all be it from a cager's headlights.......

OSRAM SYLVANIA - Product Comparison

conrad · 06-26-2007, 10:54 AM

Silverstar is still a 55/60 watt bulb. I've been running a 55/100 since bike was new , 03/05, without any electrical issues.

old new biker · 07-04-2007, 09:51 PM

Purchased the SilverStars yesterday at local PepBoys.

Thanks Guys

06-25-2007, 06:44 PM	#4 (permalink)
SNAFU Just Won't Go Away ! Joined: Mar 2006 Bike: '06 M50 Black Location: Winnipeg, Canada Posts: 5,006	I think there are a few members who have changed to Sylvania SilverStar H4ST bulbs. I don't know if there are any melting issues with these. __________________

06-26-2007, 12:37 AM	#5 (permalink)
RedFifty In Training Joined: May 2006 Bike: Red 2005 Suzuki M50 Location: Scotia, New York Posts: 100	I use the Silverstar. I've had no problems with melting but they do not last as long as stock. I had to replace mine (with another Silverstar) after about a year. They are significantly brighter and worth it, in my opinion. -Red __________________ Red Fifty - 2005 Red M50 \| No Badges on Tank \| Silverstar \| Alley Cat \| ..Awesome..

06-26-2007, 06:20 AM	#7 (permalink)
devilboy26 In Training Joined: Oct 2006 Bike: 2008 Victory Vision Tour Premium Steel Grey Location: Central Florida Posts: 147	Same Here! Replaced my stock with the Sylvania and it is SUPER bright! When I ride alone(not group) I use the high beam and often get flashed by cars that dont like my BRIGHT light ! Anything we can do to be seen better is a plus! I bought the 2 pack so I have an extra,still going strong since Dec 06. __________________ Ride Safe with a HARD STIFF One!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clear Lenses / Bulbs Problem	Pinhy	Marauder M50 Secret Hideaway	69	06-25-2007 09:30 PM
my helmet is MELTING!!!!!	BrianHeath	The Paddock	35	04-25-2007 10:34 PM
It's Melting!!	Apertureguy	Off Topic	10	02-21-2007 01:15 PM
headlight bulbs ?	meier50	Marauder M50 Secret Hideaway	5	09-05-2006 09:39 PM
Replacement headlight bulbs?	bluem50	Marauder M50 Secret Hideaway	17	05-28-2006 10:19 PM

06-25-2007, 02:14 PM	#3 (permalink)
Frizzy79 Where Am I ? Joined: May 2006 Bike: 06' M50 Black Location: Dayton,Ohio Posts: 40	I would assume as long as you use a standard 55/60 watt bulb you would be fine. The Piaa bulbs that I use are 55/60, but with 125/135 light output. In other words the bulb is for all intensive purposes the same as stock, yet much brighter and more clear.. I had a Honda Civic SI that I put 100 watt bulbs in and it melted the wiring harness, so I went with Plasma lights with the same wattage as stock, but higher light output and it worked very well..

06-26-2007, 01:25 AM	#6 (permalink)
RicoChet Fender Buffer Joined: Jun 2006 Bike: 2005 Black M50 Location: Thornhill, Ontario Posts: 436	I can definitely vouch for the H4 Sylvania Silverstar bulb... Noticeably brighter and whiter then a regular stock bulb, much better for visibility.

06-26-2007, 10:54 AM	#9 (permalink)
conrad In Training Joined: Jun 2005 Bike: 2005 M50 Location: CT Posts: 118	Silverstar is still a 55/60 watt bulb. I've been running a 55/100 since bike was new , 03/05, without any electrical issues.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)