empty fuel alarm light. - Page 2 - Motorcycle-Journal Forums

blackmagic666 · 06-26-2006, 10:08 AM

some news about this damage i did....

now (without doing anything) the horn and the neutral lamp don't work anymore....

sigh....i'd better cut my hands sometimes!!!

**Louis** · 06-26-2006, 10:24 AM

Bummer, looks like things are not improving...

I was suggesting the Service manual for the diagram in order to know to what each wire is connected so you can test each end with a voltage/ohm meter.

Patience and thoroughness is the only advice I can can give.

blackmagic666 · 07-05-2006, 05:52 AM

the problem was that two fuse were burned...

i changed them (1x10A - 1x15A) and now everythin goes!!!

Any idea if this problem is related to the missing speedo?

dragbar · 07-05-2006, 06:30 AM

It could of happened when you were installing it. Just keep some extra fuses and give your wires a good look over for shorts. At least now you know why they weren't working if it does happen again.

blackmagic666 · 07-05-2006, 07:45 AM

thanx Drag....

i thought something like that....now the new speedo is not installed yet and the cables are not connected.

I will isolate them better while i'm waiting...

Do you think i should keep (connected) the original board somewhere on the bike?

**Louis** · 07-05-2006, 08:17 AM

Probably created a short circuit when installing/removing the speedo.

Glad it all worked out!

No pointin keeping on the bike if you don't use it. Just make sure there's no short.

06-26-2006, 10:24 AM	#22 (permalink)
Louis Administrator Joined: Sep 2003 Bike: SV650S '05 (Blue) Location: Gatineau, QC, Canada Posts: 10,658	Bummer, looks like things are not improving... I was suggesting the Service manual for the diagram in order to know to what each wire is connected so you can test each end with a voltage/ohm meter. Patience and thoroughness is the only advice I can can give. __________________ Louis

07-05-2006, 06:30 AM	#24 (permalink)
dragbar Fifth gear streak Joined: May 2005 Bike: M50 Location: SE Missouri Posts: 1,375	It could of happened when you were installing it. Just keep some extra fuses and give your wires a good look over for shorts. At least now you know why they weren't working if it does happen again. __________________ I ate Chinese last night..........should of seen her struggle when i put her in the van. Доверя́й, но проверя́й.

07-05-2006, 08:17 AM	#26 (permalink)
Louis Administrator Joined: Sep 2003 Bike: SV650S '05 (Blue) Location: Gatineau, QC, Canada Posts: 10,658	Probably created a short circuit when installing/removing the speedo. Glad it all worked out! No pointin keeping on the bike if you don't use it. Just make sure there's no short. __________________ Louis

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
head light and tail light modulators	Frostydog	Marauder M50 Secret Hideaway	2	02-06-2006 08:23 AM
That wacky C50 fuel light!	The Duke	Cruisers	26	12-16-2004 05:36 PM
Motorcycle Alarm???	GothamEMS	Sportbikes & Sport-tourers	5	08-23-2004 09:07 PM
fuel injection light	The Chad	Mechanics Corner	7	12-24-2003 12:24 AM

06-26-2006, 10:08 AM	#21 (permalink)
blackmagic666 Clunked into first gear Joined: Jan 2006 Bike: Black M50 Location: Italy Posts: 213	some news about this damage i did.... now (without doing anything) the horn and the neutral lamp don't work anymore.... sigh....i'd better cut my hands sometimes!!!

07-05-2006, 05:52 AM	#23 (permalink)
blackmagic666 Clunked into first gear Joined: Jan 2006 Bike: Black M50 Location: Italy Posts: 213	the problem was that two fuse were burned... i changed them (1x10A - 1x15A) and now everythin goes!!! Any idea if this problem is related to the missing speedo?

07-05-2006, 07:45 AM	#25 (permalink)
blackmagic666 Clunked into first gear Joined: Jan 2006 Bike: Black M50 Location: Italy Posts: 213	thanx Drag.... i thought something like that....now the new speedo is not installed yet and the cables are not connected. I will isolate them better while i'm waiting... Do you think i should keep (connected) the original board somewhere on the bike?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)