Need some help - Motorcycle-Journal Forums

pmccartt · 09-16-2008, 11:36 AM

I feel kinda stupid, but I can't figure out how to disconnect one of the turn signal connectors in the headlight assembly. I am trying to install a light bar and cannot get either one of the white snap connectors loose on either signal wire. The black connectors were no problem. Any ideas? Thanks.

sra4031 · 09-16-2008, 12:25 PM

Pain in the donkey that is for sure. It is hard to see the tip that has to be pushed down and even harder to push it down. I do not know how I got mine off. I will say cussing helps

Make sure to mark one of them so you know which is which when you put it back together.

pmccartt · 09-16-2008, 01:29 PM

Thanks Jason...finally got it. It was a pain. Thanks again.

Pat

sra4031 · 09-16-2008, 01:31 PM

Well I did not want you to feel you was the only one in the boat. Next time I think I will change my connectors out. I prefer the bullet connectors so I do not have to worry about pulling out the wire.

Be sure to check out the new members area and introduce yourself and your ride.

09-16-2008, 11:36 AM	#1 (permalink)
pmccartt Newbie Joined: Sep 2008 Bike: 2007 Suzuki Blvd C50 Posts: 2	Need some help I feel kinda stupid, but I can't figure out how to disconnect one of the turn signal connectors in the headlight assembly. I am trying to install a light bar and cannot get either one of the white snap connectors loose on either signal wire. The black connectors were no problem. Any ideas? Thanks.

09-16-2008, 12:25 PM	#2 (permalink)
sra4031 Third gear and cruising Joined: Jul 2008 Bike: '08 Suzuki C50C Location: Smyrna, TN Posts: 457	Pain in the donkey that is for sure. It is hard to see the tip that has to be pushed down and even harder to push it down. I do not know how I got mine off. I will say cussing helps Make sure to mark one of them so you know which is which when you put it back together. __________________ Jason B Bour Smyrna, TN boozing and cruzing definitely don't mix

09-16-2008, 01:31 PM	#4 (permalink)
sra4031 Third gear and cruising Joined: Jul 2008 Bike: '08 Suzuki C50C Location: Smyrna, TN Posts: 457	Well I did not want you to feel you was the only one in the boat. Next time I think I will change my connectors out. I prefer the bullet connectors so I do not have to worry about pulling out the wire. Be sure to check out the new members area and introduce yourself and your ride. __________________ Jason B Bour Smyrna, TN boozing and cruzing definitely don't mix

09-16-2008, 01:29 PM	#3 (permalink)
pmccartt Newbie Joined: Sep 2008 Bike: 2007 Suzuki Blvd C50 Posts: 2	Thanks Jason...finally got it. It was a pain. Thanks again. Pat

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)