|
|
| Cruisers Lots of chrome and an open road. Talk about it here! |
 |
| | LinkBack | Thread Tools |
05-17-2008, 09:52 PM
| #1 (permalink) |
| Where Am I ?  Join Date: Aug 2006
Bike: 2006 Suzuki Boulevard S50
Location: North
Posts: 45
|  Bent Forks?
I Have a 06 Suzuki S50, I Bought a suzuki (oem) Windshield Part #: 990A0-70001 and I tried to install it today, After 4hrs I gave up. There are 2 bracket that gets attached to the forks (wrapped around). Each bracket has 2 holes (one hole on top and one on the bottom), the windshield have 2 brakets with two holes to match the forks bracket. Four spacers (1" length each) are required between the forks bracket and the windshield bracket I tightened one side and when I tried to fasten the other side, I could not. the two bracket were not parallel, I could not fit the spacer (too tight) on the bottom hole and the top holes needs a longer spacer (at least 1/2 "). There is no adjustment on the shield brackets and the forks brackets follow the forks, nothing looks bent as far as the shield. Are my forks bent? and how do I knew? Thanks Smikail |
