A little advise please. (Highway pegs for Suzuki engine guards) - Motorcycle-Journal Forums

Sgt Mike · 03-20-2006, 08:52 PM

Where can one get reasonably priced road pegs to fit a Suzuki engine guard?

Time4me2ride · 03-20-2006, 09:57 PM

Xtremedave has good prices if you like the Kuryakyn products. I got pegs from him for my M50, I chose the small ISO pegs and like them. But get the 1.25 inch diameter clamps, the Suzuki website indicated 1 inch for the OEM engine guard and I had to change the order. Dave's customer service was great.

DrBob · 03-20-2006, 10:14 PM

Any pegs with 1-inch clamps will fit. You can get generic pegs from JC Whitney or other online stores pretty cheap.

**Trapper** · 03-21-2006, 07:58 AM

Quote:

Originally Posted by Time4me2ride

Xtremedave has good prices if you like the Kuryakyn products. I got pegs from him for my M50, I chose the small ISO pegs and like them. But get the 1.25 inch diameter clamps, the Suzuki website indicated 1 inch for the OEM engine guard and I had to change the order. Dave's customer service was great.

BTW Sarge, you can find xTremeDave Here.

Clintoysterwood · 03-23-2006, 10:58 AM

Sgt Mike,

Just purchased the J C Whitney pegs for my Cobra guards purchased from Oneida. I'll post the quality when they get here. Otherwise, the price was right. Clint

**Clint** · 03-23-2006, 07:42 PM

Every thread on the internet seeks advice. Please use more descriptive titles.

Bad Boy · 03-23-2006, 08:41 PM

they are 1.25" i just put on the suzuki guards & bought 1" pegs. wrong size. had to get 1.25. i went with kuryakyn offset pegs love them. you need to get the pegs out some because your right leg hits the air cleaner. i learned all this the hard way. i finally just went to a harley dealer near by. they had probably 100 different combinations of mounts & pegs. you could mix & match to get what you wanted. alittle pricey but worth it

03-20-2006, 08:52 PM	#1 (permalink)
Sgt Mike Banned Joined: Feb 2006 Bike: 2006 Suzuki C50 Location: Hagerstown, Maryland Posts: 709	A little advise please. (Highway pegs for Suzuki engine guards) Where can one get reasonably priced road pegs to fit a Suzuki engine guard?

03-20-2006, 10:14 PM	#3 (permalink)
DrBob In The Zone Joined: May 2004 Bike: several Location: Decatur, GA Posts: 2,765	Any pegs with 1-inch clamps will fit. You can get generic pegs from JC Whitney or other online stores pretty cheap. __________________ Dream like you'll live forever, live like you'll die tomorrow. You MUST obey the pug dog!

03-23-2006, 08:41 PM	#7 (permalink)
Bad Boy Wife's pet :) Joined: May 2005 Bike: 04 volusia 800 Location: camas wa Posts: 127	they are 1.25" i just put on the suzuki guards & bought 1" pegs. wrong size. had to get 1.25. i went with kuryakyn offset pegs love them. you need to get the pegs out some because your right leg hits the air cleaner. i learned all this the hard way. i finally just went to a harley dealer near by. they had probably 100 different combinations of mounts & pegs. you could mix & match to get what you wanted. alittle pricey but worth it __________________ sky

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Highway pegs	barcodez	Marauder M50 Secret Hideaway	2	04-24-2006 05:44 PM
C50 and Highway pegs	DanoHB	Cruisers	11	11-07-2005 01:41 PM
Highway Pegs	suzukiguy	Marauder M50 Secret Hideaway	7	10-03-2005 10:27 PM
Highway Pegs	ChicsterMG	Volusia/C50 Getaway	1	08-02-2005 05:55 PM
Highway Pegs	boz	Cruisers	4	11-29-2004 05:19 PM

03-20-2006, 09:57 PM	#2 (permalink)
Time4me2ride Sprocket Pilot Joined: Oct 2005 Bike: Silver/Grey VStar1300 Location: Colorado Springs Posts: 846	Xtremedave has good prices if you like the Kuryakyn products. I got pegs from him for my M50, I chose the small ISO pegs and like them. But get the 1.25 inch diameter clamps, the Suzuki website indicated 1 inch for the OEM engine guard and I had to change the order. Dave's customer service was great.

03-23-2006, 10:58 AM	#5 (permalink)
Clintoysterwood Seat Tester Joined: Feb 2006 Bike: 2005 C50 Location: Foothills of the Cascades Posts: 79	Sgt Mike, Just purchased the J C Whitney pegs for my Cobra guards purchased from Oneida. I'll post the quality when they get here. Otherwise, the price was right. Clint

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)