C90 Owner - Motorcycle-Journal Forums

BraveC90 · 11-06-2005, 04:03 PM

I have 400 miles on my new bike. I took it out for a spin today and notice it was stauling out when I went from 2nd gear to 3rd. It also back - fired. I drove it for about 5 minutes and the problem went away. This is the second time this has happened. Has anyone had this problem?

BraveC90
2005 Black and Silver

DrBob · 11-06-2005, 07:23 PM

Have the dealer give it the once-over when you bring the bike in for the first service at 600 miles. The FI may have a dirty or sticking component, the computer could be screwed, a sensor could be screwed, you could have an exhaust or intake leak causing odd readings at a sensor, the enricher circuit could be set up wrong ot malfuctioning/ sticking...could be a lot of things.

tlwisner · 11-07-2005, 08:00 AM

Are you revving high enough before you shift?

Chip Beazley · 11-07-2005, 01:50 PM

You may have had a little bit of water in your gas and that can cause stalling and back-fires. I have almost 1200 miles on mine and so far have never had as mich as a hiccup. when I am putting around i normally shift into 2nd at not much more speed than a fast walk. Never experienced any problem. The bike has enough torque to pull off from a stop in 2nd gear with no sweat.

11-06-2005, 04:03 PM	#1 (permalink)
BraveC90 Newbie Joined: Oct 2005 Posts: 6	C90 Owner I have 400 miles on my new bike. I took it out for a spin today and notice it was stauling out when I went from 2nd gear to 3rd. It also back - fired. I drove it for about 5 minutes and the problem went away. This is the second time this has happened. Has anyone had this problem? BraveC90 2005 Black and Silver

11-06-2005, 07:23 PM	#2 (permalink)
DrBob In The Zone Joined: May 2004 Bike: several Location: Decatur, GA Posts: 2,765	Have the dealer give it the once-over when you bring the bike in for the first service at 600 miles. The FI may have a dirty or sticking component, the computer could be screwed, a sensor could be screwed, you could have an exhaust or intake leak causing odd readings at a sensor, the enricher circuit could be set up wrong ot malfuctioning/ sticking...could be a lot of things. __________________ Dream like you'll live forever, live like you'll die tomorrow. You MUST obey the pug dog!

11-07-2005, 08:00 AM	#3 (permalink)
tlwisner Throttle Jockey Joined: Apr 2004 Bike: '05 Boulevard C50 Location: Central Kentucky Posts: 3,208	Are you revving high enough before you shift? __________________ Tim Wisner AMA, SCRC Happiness is something we create

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New M50 owner	interfire83	Marauder M50 Secret Hideaway	18	02-27-2006 11:36 AM
Another new M50 owner.	BillyBumbler	Cruisers	19	11-09-2005 10:27 PM
New M50 owner	S2Design	Marauder M50 Secret Hideaway	30	11-04-2005 10:26 AM
New M-50 Owner	Smurf	Cruisers	32	06-18-2005 01:27 AM
New Owner :)	knowah	Sportbikes & Sport-tourers	15	12-28-2003 04:59 AM

11-07-2005, 01:50 PM	#4 (permalink)
Chip Beazley Newbie Joined: Sep 2005 Posts: 1	You may have had a little bit of water in your gas and that can cause stalling and back-fires. I have almost 1200 miles on mine and so far have never had as mich as a hiccup. when I am putting around i normally shift into 2nd at not much more speed than a fast walk. Never experienced any problem. The bike has enough torque to pull off from a stop in 2nd gear with no sweat.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)