where can i get front fork mounts? for turn signal??? - Motorcycle-Journal Forums

ICE77 · 10-06-2005, 12:09 AM

hey guys i am haeing a hard time finding some mounts to mount my bullet front turn signals on the front forks. the forks are 2 1/8 inch or about 52mm. does anyone know where to get these or what they had to do to there bike to get them mounted?????

thanks guys for the help

ICE 77

bud van houten · 10-06-2005, 01:08 AM

i made mine. went to ace hardware, got some flat aluminum stock , cut and bent it to make the bracket i needed, then polished it. later, bud

**intimid8er** · 10-06-2005, 07:00 AM

Here ya go.

http://www.jpcycles.com/search.aspx?...amps&store=All

The P clamp (listed first) or in the same catalog, there is another Kuryakyn fork mount clamp (forgot the name). It'll fit up to 43mm forks.

ICE77 · 10-06-2005, 08:42 AM

the suzuki has there thicker part of the forks at the top they are inverted so i need to find a clamp at 52mm or 2 1/8

cjjtulsa · 10-06-2005, 09:27 AM

That's exactly right - I had to make some exhaust hanger brackets from J&P Cycles work to mount my Silver Bullets for driving lights. I've seen some other clamps for the VTX that are I think 58mm or 59mm, but they'd be too big, unless you used something for a shim. Can't remember who makes them.

ICE77 · 10-24-2005, 05:11 PM

ok guys here is what i done for a quick fix!!!!

i used the stock rubber peices that wrap forks!!!! if anyone needs to know how i will be happy to help

10-06-2005, 12:09 AM	#1 (permalink)
ICE77 Where Am I ? Joined: Sep 2005 Bike: 99 maruader Location: Mars Hill, NC Posts: 45	where can i get front fork mounts? for turn signal??? hey guys i am haeing a hard time finding some mounts to mount my bullet front turn signals on the front forks. the forks are 2 1/8 inch or about 52mm. does anyone know where to get these or what they had to do to there bike to get them mounted????? thanks guys for the help ICE 77

10-06-2005, 07:00 AM	#3 (permalink)
intimid8er It's A Conspiracy Joined: May 2005 Bike: '06 XB12X Location: 30 41'47.99" N 83 11'26.54" W Hold My Beer Posts: 9,795	Here ya go. http://www.jpcycles.com/search.aspx?...amps&store=All The P clamp (listed first) or in the same catalog, there is another Kuryakyn fork mount clamp (forgot the name). It'll fit up to 43mm forks. __________________ Song Pick of the Week 10/08 The Butthole Surfer's - Who Was In My Room Last Night? <Insert nothing original in this space>

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
turn signal is out	envision1	Gixxer Mixer	7	06-01-2006 06:00 PM
Need Turn Signal Help	Joejitsu	Sportbikes & Sport-tourers	10	12-15-2005 07:58 PM
turn signal question	flipmo	Sportbikes & Sport-tourers	5	03-20-2005 07:47 AM
Turn Signal Replacement	Normal	Cruisers	0	10-21-2004 07:29 PM
New LED Front Turn Signal & Undertail	GothamEMS	Members Photo Gallery	2	09-07-2004 05:28 PM

10-06-2005, 01:08 AM	#2 (permalink)
bud van houten Ditch Magnet Joined: Sep 2005 Bike: 2000 intruder lc 1500 Location: kansas city, mo. Posts: 175	i made mine. went to ace hardware, got some flat aluminum stock , cut and bent it to make the bracket i needed, then polished it. later, bud

10-06-2005, 08:42 AM	#4 (permalink)
ICE77 Where Am I ? Joined: Sep 2005 Bike: 99 maruader Location: Mars Hill, NC Posts: 45	the suzuki has there thicker part of the forks at the top they are inverted so i need to find a clamp at 52mm or 2 1/8

10-06-2005, 09:27 AM	#5 (permalink)
cjjtulsa Third gear and cruising Joined: Jun 2005 Bike: 2004 Marauder 1600 Black Location: Collinsville, Oklahoma Posts: 507	That's exactly right - I had to make some exhaust hanger brackets from J&P Cycles work to mount my Silver Bullets for driving lights. I've seen some other clamps for the VTX that are I think 58mm or 59mm, but they'd be too big, unless you used something for a shim. Can't remember who makes them.

10-24-2005, 05:11 PM	#6 (permalink)
ICE77 Where Am I ? Joined: Sep 2005 Bike: 99 maruader Location: Mars Hill, NC Posts: 45	ok guys here is what i done for a quick fix!!!! i used the stock rubber peices that wrap forks!!!! if anyone needs to know how i will be happy to help

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)