debaffle c50t do it or dont - Motorcycle-Journal Forums

gumby1977 · 04-07-2008, 12:35 PM

hello , is there anybody that can give me a little advice on debaffling my c50t I want to do it but I dont want to ruin anything. Is it all cool to the bike?

Thanks

robertc729 · 04-08-2008, 08:00 AM

I debaffled my C50 and love the sound, some like it, some don't.

johbren · 04-08-2008, 10:23 AM

Do it

Alex13 · 04-08-2008, 05:08 PM

Go to the M50 forum. Click on the sticky threads and there is a link to a video. Just follow that and you will be fine. I followed the video and everything turned out perfect

gumby1977 · 04-08-2008, 05:09 PM

OK does eather of your bikes backfire or run lean? how much diffrence does it make sound wise sound really good, loud, or really loud?

Thanks for the replys

Alex13 · 04-08-2008, 05:19 PM

It runs fine. There was a little black smoke when I first did it, but that was just from what I shook loose drilling. I haven't had any backfiring.

The sound is good. Not to loud at idle, it sounds really good when you get on it. In my opinion it isn't too loud. A few people think it is. Its perfect for me.

You might wanna drill holes first and see how you like it before taking the plunge.

gumby1977 · 04-08-2008, 05:42 PM

ok thanks. that is what I was thinking.

eftimSBC90K6BK · 04-08-2008, 08:11 PM

This may help you:
De-baffle this!

gumby1977 · 04-09-2008, 05:28 PM

hey guys I drilled holes in the ends of the pipe lastnight and I think I will leave it like that it really made a diffrence. I am thinking that if I remove all the way it will sound hollow is that true. and does it make it even more louder without baffles?

But anyway I will probably let it fly for a while.

rathr-b-cruisin · 04-11-2008, 09:02 AM

I did it last year. and did not like it at all. I think if you are expecting an aftermarket rumble with good sound, you wont get it this way. I went back to stock and am going to stay there. To me the debaffle sound is very hollow and tinny.

04-07-2008, 12:35 PM	#1 (permalink)
gumby1977 Newbie Joined: Apr 2008 Bike: Suzuki Boulevard C50T Location: Nibley, Utah Posts: 13	looking for advice on debaffeling hello , is there anybody that can give me a little advice on debaffling my c50t I want to do it but I dont want to ruin anything. Is it all cool to the bike? Thanks Last edited by gumby1977; 04-07-2008 at 05:23 PM.

04-08-2008, 05:08 PM	#4 (permalink)
Alex13 Third gear and cruising Joined: Sep 2007 Bike: 2007 Boulevard M50 (Black) Location: Stockbridge, GA Posts: 481	Go to the M50 forum. Click on the sticky threads and there is a link to a video. Just follow that and you will be fine. I followed the video and everything turned out perfect __________________ Set low goals so you can overachieve.

04-08-2008, 05:19 PM	#6 (permalink)
Alex13 Third gear and cruising Joined: Sep 2007 Bike: 2007 Boulevard M50 (Black) Location: Stockbridge, GA Posts: 481	It runs fine. There was a little black smoke when I first did it, but that was just from what I shook loose drilling. I haven't had any backfiring. The sound is good. Not to loud at idle, it sounds really good when you get on it. In my opinion it isn't too loud. A few people think it is. Its perfect for me. You might wanna drill holes first and see how you like it before taking the plunge. __________________ Set low goals so you can overachieve.

04-11-2008, 09:02 AM	#10 (permalink)
rathr-b-cruisin Found second gear by accident Joined: Mar 2006 Bike: Suzuki Boulevard C50 Location: Michigan Posts: 329	I did it last year. and did not like it at all. I think if you are expecting an aftermarket rumble with good sound, you wont get it this way. I went back to stock and am going to stay there. To me the debaffle sound is very hollow and tinny. __________________ Ride Hard, Pray Harder.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
It dont get better than this	AZRyder	Off Topic	3	02-12-2008 01:52 AM
Debaffle PCIII MAP???	M50_Limited	Marauder M50 Secret Hideaway	4	10-25-2007 01:38 PM
S40 debaffle?	tyler durden	Cruisers	2	06-23-2007 09:10 PM
Best way to debaffle?	Mikal X	The Boulevard	4	10-12-2006 12:29 PM
Dont ask me how i know....	NeVeRSaTiSfIeD	The Paddock	15	04-19-2005 01:48 PM

04-08-2008, 08:00 AM	#2 (permalink)
robertc729 Forensic Bug Splatter Analyst Joined: Mar 2006 Bike: 05 Boulevard C50 LE, 06 S40 (wife's bike) Location: Lexington, KY Posts: 4,086	I debaffled my C50 and love the sound, some like it, some don't.

04-08-2008, 10:23 AM	#3 (permalink)
johbren Ditch Magnet Joined: Jun 2007 Bike: 2007 red and black c50 Location: lewisburg ohio Posts: 179	Do it

04-08-2008, 05:09 PM	#5 (permalink)
gumby1977 Newbie Joined: Apr 2008 Bike: Suzuki Boulevard C50T Location: Nibley, Utah Posts: 13	OK does eather of your bikes backfire or run lean? how much diffrence does it make sound wise sound really good, loud, or really loud? Thanks for the replys

04-08-2008, 05:42 PM	#7 (permalink)
gumby1977 Newbie Joined: Apr 2008 Bike: Suzuki Boulevard C50T Location: Nibley, Utah Posts: 13	ok thanks. that is what I was thinking.

04-08-2008, 08:11 PM	#8 (permalink)
eftimSBC90K6BK Where Am I ? Joined: Mar 2008 Bike: Suzuki Boulevard C90 2006 Location: Indiana Posts: 28	This may help you: De-baffle this!

04-09-2008, 05:28 PM	#9 (permalink)
gumby1977 Newbie Joined: Apr 2008 Bike: Suzuki Boulevard C50T Location: Nibley, Utah Posts: 13	hey guys I drilled holes in the ends of the pipe lastnight and I think I will leave it like that it really made a diffrence. I am thinking that if I remove all the way it will sound hollow is that true. and does it make it even more louder without baffles? But anyway I will probably let it fly for a while.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)