View Single Post
Old 01-28-2005, 03:36 PM   #3 (permalink)
The Chad
Site Wrench Head
 
The Chad's Avatar
 
Joined: Nov 2003
Bike: crashed
Location: Duncan B.C.
Posts: 635
Send a message via MSN to The Chad
Default

the braided steal lines are a very worth while investment, IF, you ride hard and optimum break responce and feel is required. My opinion about putting them on a cruiser, the only thing they really do for you is look better. Yes they will give you a slightly different feel, but not muh difference. Break lines are really simple to put on and blead, remember not to overtighten the banjo bolts, they break much easier than normal bolts because they are drilled. I would also suggeset giving the fluid a good flush while you're at it. If you accedantly get brake fluid on the bike some where, the best thing to do is dump water on it, it almost totally desolves it on contact. Brake fluuid id designed to evenly dispurse water within itself that's why water works really well to clean it up, after the water, just use a mild degreaser to finish cleaning.
__________________
A truly wise man asks more questions than he answers, I think I must be retarted
The Chad is offline   Reply With Quote