Quote:
Originally Posted by davecrash  It's only a 3/4" stud, need 1" |
I looked at it and I will move the set screw in, and 3/4 long stud will work, BUT, Those Have 1/4 Thread(too small), Im going to drill, the bar 5/16, so a 3/8, or 10mm can be used, it can always be made larger just run a drill back in, but to use 1/4 you would need to sleeve it, it could be made to work, but Im not going to be making sleeves...lol, for all different sizes.