Played around with it after work, found a flaw, as you can see in this pic, its almost impossible to get to mounting screws to adjust, it can be done, but I'm going to turn brackets around and rotate the mounting pad 25 degree's and it will be much better...will post updated pic's when done.
As for making these bars, anyone that wants one, I will make the bar available(Bar and Mounts only), it is made for the lights I bought, and you will need to buy them , you will also need the rear turn adapters as show above or have a set with 10mm threads. If someone wants to start looking for a set of turns that will work, can be 10mm mount or something close, I have not been able to find just the rubber adapter for the rear that is needed, I can only find it on a complete unit. and they want around $57.00 each.
So anyone interested, hang tight, and please, if you have any input, let me know. As for a price, the bar and mounts will be close to $100.00, allot of work in it, cost of light kit was $36 for the chrome, the black are on close out while they last at $19.95.
here was link
Optilux 1500 Series
So with out the turns your around $136 or a little less with black lights.
If anyone knows a cheaper route on the turns, let me know, I cant make the rubber adapters, or I would...lol, and I dont think anyone wants to pay that much for the unit and just use the rubber mount. Thats the only snag, with this project.