OK...got the model done today, it it shaped to match the flow of the front forks, also pic's of removing the mount from the rear turns to use on the front,
Any 10mm stud mount turns will work, on this bar, I don't know about the state laws, but I want to keep the running lights, in front,so I will remove the guts from the front, and mount them on the rear adapters, they are a three wire set-up...if you didn't want the running light, the rears, could be mounted for turns only with the 2 wire set-up..
Here is some teaser pic's, will work on it more tomorrow, and post before and after pic's with it mounted with driving lights...
Have a towel handy, I know your gonna drool...
