Quote:
Originally Posted by DOGBONE  So where did the spikes come from, I like those. |
screw back spikes -
The silver ones have 6mm threads already. So I threaded on a 6mm nut onto a 6mm bolt, put a dab of Red threadlock on it and tighened it into the spike. I then cut the head off (it was a 3" bolt) with a hack saw and unscrewed the nut to chase the threads.
The black ones come with 1/4" threads so I ran a 6mm tap down them and did the same steps as above.
The bolts that go into the fender are shoulderd, so I made some from some steel tubing I had laying around.