ok i got my new plugs and after i let it sit for a day and dry up it fired right up. now a day later after i rode it, it ran great;like a top, now its doing the same thing again. after i rode it i shut the gas off to make sure it wouldnt flood up again. this morning when i went out to try to start it...nothing. brand new plug. i pulled it out and it was soaked. it keeps flooding up on me when i try to start it if its not hot. how can this be. i will go over everything i did so far...motor has just been rebuilt, i installed boysen rad valves, jetted the main down from 158 stock, to 155. the pilot is still stock 42 and the needle clip in in the 2nd position now. the pilot air screw is 1 and 3/4 turns out. new air filter and plugs. fuel/oil is at 40:1 and the carb is clean as a whistle. i just dont understand why it floods up on me after letting it sit for a little while. PLEASE help.....
|