Motorcycle-Journal Forums - View Single Post - 3rd Party Back Rest 12-15" range for 2005 Suzuki Boulevard 1400 S83

DrBob · 05-12-2008, 04:10 PM

There are litterally thousands of aftermarket sissy bars for Harleys, which you can make fit very easily my simply elongating the holes in the mounting plates a little. I forget which model is the same width though...if you measure the width of your rear fender and it is 7 inches, a Dyna Glide sissy bar will fit. Or go to the Harley dealer and see what model has the same width fender as your bike, and then order a 3d party bar and mount plates.

05-12-2008, 04:10 PM	#4 (permalink)
DrBob In The Zone Joined: May 2004 Bike: several Location: Decatur, GA Posts: 2,702	There are litterally thousands of aftermarket sissy bars for Harleys, which you can make fit very easily my simply elongating the holes in the mounting plates a little. I forget which model is the same width though...if you measure the width of your rear fender and it is 7 inches, a Dyna Glide sissy bar will fit. Or go to the Harley dealer and see what model has the same width fender as your bike, and then order a 3d party bar and mount plates. __________________ Dream like you'll live forever, live like you'll die tomorrow. You MUST obey the pug dog! Last edited by DrBob; 05-12-2008 at 04:13 PM.