Quote:
Originally Posted by Hops  I just went and tried some advice you guys were giving me and I noticed something. |
I think we've gone about as far as we can go until you get a simple multi-meter (and learn to use it, if you don't already know). The cross-coupling between the two coils is not unusual, if they are mounted physically close to each other.
The switch you have done proves that the coils and plug wires are good.
There is one bad "input wire". The problem is with that wire or the points/condenser assembly that it is connected to or with the 12V input to that assembly. Pretty simple stuff really.........but you've GOT to have a meter. Are you sure that set of points is opening and closing ???