Motorcycle-Journal Forums - View Single Post

BCblvd · 08-25-2007, 04:52 PM

Hey gang,
I got the new Iso's installed, with Stilleto end weights. For now, I am using my old generic throttle boss.
Question about the install: I used the orange CPVC glue that was suggested to allow time to rotate the left grip to match the right with the throttle. I looked for closeups of other C90's to see if my chrome bars aligned as theirs had, but didn't find any. I found some M50's and it appears the chrome longitudinal bars run parallel to their brake and clutch levers. No matter how I adjusted my throttle, mine aligned with the seam on the throttle cable housing, almost to the mirrors. I was wondering if they all align a little differently - if anyone knows. I dont see that it really matters, and I feel certain the throttle is correctly working, but wanted to check.
Thanks, doug

08-25-2007, 04:52 PM	#1 (permalink)
BCblvd In Training Joined: May 2007 Bike: 2005 Suzuki C90 Blvd Location: Austin, Texas Posts: 112	New Iso Grips installed on C90 Hey gang, I got the new Iso's installed, with Stilleto end weights. For now, I am using my old generic throttle boss. Question about the install: I used the orange CPVC glue that was suggested to allow time to rotate the left grip to match the right with the throttle. I looked for closeups of other C90's to see if my chrome bars aligned as theirs had, but didn't find any. I found some M50's and it appears the chrome longitudinal bars run parallel to their brake and clutch levers. No matter how I adjusted my throttle, mine aligned with the seam on the throttle cable housing, almost to the mirrors. I was wondering if they all align a little differently - if anyone knows. I dont see that it really matters, and I feel certain the throttle is correctly working, but wanted to check. Thanks, doug __________________