Quote:
|
Originally Posted by larry109 Swril marks finally going away, I have put about 10 coats of Mothers and 3M swril remover. Just curious, does the plastic covers on the M109R have a clear coat on them. Should you use the swril remover with or without use for clear coat.
DSO6C50T, did you find out if the plastic remover works better, or just keep buffing.
Larry |
Larry,
I went with the swirl remover for plastic 2-3 times, THEN polished it out with wax. Didn't come out 100% swirl-free, but it's VERY close to it and that's good enough for me!
Cheers,
Daryl