This is the procedure to adjust the cam chain tensioner.
1. Loosen the 10 mm locknut.
2. Tighten the lockscrew (should only move about 1/4 turn).
3. Remove the 2 10 mm mounting bolts.
4. Unscrew the lockscrew 1/4 turn until the plunger releases.
5. Push in the plunger while turning the large knurled knob counter
clockwise until the plunger stops.
6. Tighten the lockscrew.
7. Install the tensioner to the engine.
8. Loosen the lockscrew 1/4 turn. You will hear it release.
9. Tighten the locknut.
10. Thats all folks!
|