Well today i decided to mess around with the bike. I went out and checked the fuel pump i turned on bike and didnt hear it running hope its just the relay. Also i pulled the gas tank, air box then checked the plugs and with a test light cyclinders 3 and 4 isnt getting any spark from the plugs but cyclinder 1 and 2 is good. The carb is clean and i believe it was jetted not to long ago so i think im going to have to test my fuel pump and the relay. Would i just use an ohm meter for that and if so what would the procedures be. Also does anyone know what could make both 3 and 4 cyclinder not spark.
thanks
|